WELDER VACUUM MECA SV 500
Vacuum sealer (bag PA / PE and Alu / PE) dedicated to the medical and pharmaceutical industry.
This heat sealer vacuum bell (PA / PE bag and Alu / PE) is dedicated to the medical and pharmaceutical industry. Equipped with a 500mm bell this welder vacuum will allow you to seal vacuum bags with high accuracy.
Description of the welder vacuum :
Bar heater 500mm x 8mm self-regulated.
Heating power 1600 W.
Dimensions 1000 x 788 x h 925 mm.
Reintegration of neutral gas.
Touch screen control and control via PLC.
Registration of production parameters on USB stick.
Outputs provided for easy calibration.
Features welder vacuum :
4 controllers (PID) distributed over the bar heater for better regulation.
Communication (digital) ModBus between the controller and the controller allowing no loss of information related to temperature.
Pressure and vacuum controlled electronically.
Time program of heating to a temperature rise and temperature stabilization before starting production.
Reference pressure controlled digitally.
Uniformity of thrust.
Reference depression controlled digitally.
The time has flown at 100th of a second.
Accuracy of various parameters
Heater (measured in boreholes): +/- 1.0 ° C.
Time : +/- 15/100 second.
Welding pressure : +/- 0,2 bar.
Depression : +/- 15 mbar.
Limitations of Use
Heating : 90 ° C to 150 ° C.
Time : 0,1s to 15 second.
Pression : 2 bars to 7 bars.
Depression : 30 to 700 mbars
Traceability of each cycle on USB (time, temperature, pressure and depression) key.
Calibration mode (time, temperature, pressure and depression).
Lending / property standards (time, temperature, pressure and depression).
Folder QC, IQ, OQ, PQ available on request at extra cost.
Compliance with safety.
The pneumatic part is made with material SMC.
The controller and display are Schneider brand.
Temperature control is performed with hardware Geffran.